Our concrete and cement hardener is made from active minerals which, combined with free lime from cement or limestone, form perfectly indissoluble and very solid fluates. This reaction causes a very strong reduction of the dust, as well as of the capillaries of the support.
Application temperature: +5°C to +45°C.
Service limit temperature: -45°C to +90°C.
Consumption: 0.1 to 0.25 liters per m2 (1 liter for 4 to 10 m2).
Drying time between two coats: 48 hours.
Dust drying time: 48 hours.
Return to circulation: 48 hours.
Properties:
Colorless product.
Monocomponent, ready to use.
Increased support resistance by more than 30%.
Strong resistance to marine, urban and industrial atmospheric agents.
Increased chemical resistance against fats (fats and oils), diluted bases and organic acids.
Destination:
• Concrete screeds and slabs, limestone facings.
• Eligible materials: all porous supports such as concrete, cement or limestone.
• No use if support closed (no penetration).
Recommendations:
• The support must be completely dry, degreased, dust free, sound and adherent. Eliminate non-adherent particles such as rust, mud or scale.
• Apply with sprayer, roller or brush. Clean tools with cold water.
Application:
• Application by spray, brush or roller, in one or two coats. The drying time between the two coats is 48 hours.
• Return to circulation is also possible after 48 hours of application. Can be covered with epoxy or acrylic type paints. The use of glycerophthalic paints is not recommended.