Metal Varnish

Yield: ±12 m²/l.

Application temperature: -8°C to +35°C.

Drying time: 3 hours (between each coat).

Commissioning: 1 day.

Properties:

   Your choice of tone that lasts over time.

   Enhances the beauty of the surface.

   Long-lasting: resistant and flexible film.

   Very fluid varnish.

   Easy application: no sanding between coats.

   Can be tinted with dyes (contact us).

Destination:

Steel, stainless steel, corten, aluminium, copper, iron, zinc...

Exterior: gate, furniture...

Horizontal - vertical.

Recommendations before application:

Beforehand, the surface must be clean and perfectly dry during application. Do not apply varnish in humid weather or late in the afternoon. Do not dilute.

Application:

Apply 1 to 2 coats of varnish depending on the exposure of the support. Leave to dry for at least 3 hours between each coat. There is no need to sand between coats. Leave to dry for 1 to 2 days before commissioning. Note: splashes or drips of varnish must be removed before the product dries. After drying, stains are very difficult to remove, so be very careful and remove these stains immediately after application.