Stone Varnish

Yield: ± 12 m²/L.

Application temperature: + 8 °C to + 35 °C.

Drying time: 3 hours (between each layer).

Commissioning: 3 days.

Properties:

   Durable choice in time.

   Enhances the beauty of the surface.

   Long lasting: resistant and flexible film.

   Very fluid varnish.

   Easy application: no sanding between layers, except before the last.

   Can be stained with dyes (consult us).

Destination:

Marble, granite, stone, wall, concrete...

Outside: stone terrace, furniture...

Horizontal - vertical.

Recommendations before application:

Beforehand, the surface must be clean and perfectly dry during application. Do not apply the varnish in wet weather or late in the afternoon. Do not dilute.

Application:

Apply 3 to 6 coats of varnish depending on the exposure of the substrate. Allow to dry for at least 10 hours between each coat. It is not necessary to sand between layers. Leave to dry for 3 to 4 days before putting into service. Note: Splashes or varnish runs should be removed before the product dries. After drying, the stains are very difficult to remove, so be very careful and remove these stains immediately after application.