Yacht Varnish

Yield: ± 12 m²/L.

Application temperature: + 8 °C to + 35 °C.

Drying time: 3 hours (between each layer).

Commissioning: 1 days.

Properties:

   Satin matte durable.

   Enhances the beauty of the wood.

   Resists salt water.

   Long lasting: resistant and flexible film.

   Very fluid varnish - does not mask the veining of the wood.

   Easy application: no sanding between layers, except before the last.

   Can be stained with dyes (consult us).

Destination:

Hardwoods, new or old.

Outside: garden furniture, gates ...

Horizontal - vertical.

On boat is used for all work above the waterline. Direct on prepared wood.

Recommendations before application:

Beforehand, the wood must be clean and perfectly dry during application. Do not apply the varnish in wet weather or late in the afternoon. The varnish can make the surface slippery, it is preferable, in the case of frequent passage areas (gratings, pool surround ...), to use only special wood varnish. Do not dilute.

Application:

Apply 3 to 6 coats of marine varnish depending on the exposure of the substrate. Allow to dry for at least 10 hours between each coat. It is not necessary to sand between layers. Leave to dry for 3 to 4 days before putting into service. Note: Splashes or varnish runs should be removed before the product dries. After drying, the stains are very difficult to remove, so be very careful and remove these stains immediately after application.