Our tiling waterproof sealant provides a flexible coating that protects even cracked structures, and waterproofs concrete slabs and casings. This waterproofing system before tiling for terraces, bathrooms and walk-in showers is also used by major French and international construction groups for waterproofing pools and tanks. Ready to use product and fast drying.
Application temperature: +5°C to +30°C.
Service temperature limit: -20°C to +80°C.
Yields (two coats):
- Concrete, coated or pressurized bases: 3.5 to 4 kg/m²,
- Concrete wall, precast elements: 4 to 4.5 kg/m²,
- Terraces, balconies, water features: 4 kg/m²,
- Ponds, reservoirs, water towers: 4 kg/m².
Drying time: 6 hours between coats.
Resistance to instantaneous cracking (NF P 84-402) at +23°C.
Compressive strength: 250 bar at 28 days, +20°C and 60% humidity.
Maximum qualities reached in 28 days.
Properties:
Ready-to-use, quick-drying liquid mix.
High resistance to corrosion, abrasion and erosion.
Excellent resistance to pressure and back pressure.
Freeze and thaw resistance.
Protection of even cracked structures.
Ideal under-tile sealing system.
Flexible, waterproof coating with perfect adhesion to substrates.
Very good UV resistance.
Destination:
• Terraces, balconies, water features, concrete superstructures, car parks, exterior protection of masonry, protection of concrete structures subject to salts: parapets, bridge piles, concrete slides, gutters, sidewalks, pavement, fine repairs, protection of steel " with flowers", sealing of joints between floors and walls, leveling of foundations.
• Eligible materials : poured concrete, reinforced concrete, tiles, traditional masonry, coated bricks and coated agglomerates.
Recommendations:
• First remove the laitances, dust and crumbly parts, oil stains and other dirt. Before applying the first coat, moisten the substrate well. Do not moisten between coats.
• Avoid application in the evening because of the return of stored heat, work on frozen substrates, application in full sun and in drying winds.
• The use of a brush is recommended for the application of the coating, as it promotes the penetration of the product into the pores and the elimination of air bubbles. You can also use a trowel or trowel.
Application:
• In the case of application by mechanical spraying, use a low-speed machine, spray the coating methodically in an even coat without overloading or gaps and smooth with a trowel or a brush, in order to perfect the debubbling .
• Concrete bases, coated or under pressure: on the moistened but not dripping support, apply 2 coats:
◦ 1st coat: 2 kg/m², 2.5 kg/m²,
◦ 2nd coat: 1.5 kg per m².
• Concrete wall, prefabricated elements:
◦ 1st coat: 2.5 kg/m² with mandatory incorporation of a fiberglass reinforcement between the first and second coat,
◦ 2nd coat: 1.5 to 2 kg per m².
• Terraces, balconies, water features:
◦ 1st coat: 2.5 kg/m² with mandatory incorporation of a fiberglass reinforcement between the first and second coat,
◦ 2nd coat: 1.5 to 2 kg per m².
• Swimming pools, ponds, reservoirs, and castles:
◦ 1st coat: 2.5 kg per m² with compulsory incorporation of a reinforcement in the first coat,
◦ 2nd coat: 1.5 to 2 kg per m².
• Maximum qualities reached after 28 days of drying, but light pedestrian traffic possible after 48 hours, covering with paint and replenishing with water after 14 days.
